General Wire I-95 Multi-Use Machine for Cleaning and Clearing Drains, Small

Features: General Pipe Cleaners Sectional Machine (No Cable).Here's a sectional cable machine that drives 7/8" and 5/8" sections - or even 5/16" cables for small drain workYou switch from 7/8" to 5/8" and back by repositioning the chuck coneNo adapter requiredAttach a small drum to the back of the machine to drive smaller cablesThe I-95 gives you power and convenienceThe motor is a 1/3 hp capacitor type, so it delivers plenty of torque to the cablesYet, as soon as you lift the drive handle, the cable stops rotating, so there's no additional torque build upYou also use the drive handle to carry the machineAnd when it's in position on the job, its four point base gives it rock-solid stabilityA cutter holder is attached to the back of the I-95, so your cutting heads are always with the machineA Ground Fault Circuit Interrupter is standard equipmentClear 1-1/2" - 2" lines with 5/16" x 25' cableClear 2" - 3" lines up to 125 feet long with 5/8" x 7-1/2' sections, or 4" lines up to 150 feet long with 7/8" x 15' sections.